Getting Started 1-3
Writer: Carey Gregg Saved by: Rebecca Wiggins Saved date: 02/06/98 2:06 PM
Part Number: 314932-001 File name: Ch01.doc
Taking the Battery Pack Out of Ship Mode
Before you set up the computer, you must take the battery pack
out of ship mode so that it can be charged.
Take the battery pack out of ship mode by removing and
reinserting the battery pack:
1 Tilt the computer
1
to access the battery release latch.
2 Slide the battery release latch
2
right while pulling on the
battery pack from the recess beneath the battery bay.
To Next Page
Loading...
