Upgrading RAM Memory 11-7
Writer: Carey Gregg Saved by: Rebecca Wiggins Saved date: 02/04/98 4:43 PM
Part Number: 314932-001 File name: Ch11.doc
Replacing the Memory Expansion Slot Cover
1
Lay the memory insulator
1
over the installed memory
expansion board(s), ensuring that all edges of the memory
insulator are tucked inside the memory expansion
compartment.
2
Replace the memory expansion slot cover
2
by placing it
flush right over the memory expansion compartment, then
sliding it left until it is seated.
3
Secure the memory expansion slot cover with a memory
expansion slot cover security screw
3
or a standard
Torx T-8 screw.
To Next Page
Loading...
