5-8 Using Battery Packs
Writer: Carey Gregg Saved by: Rebecca Wiggins Saved date: 12/19/97 1:13 PM
Part Number: 314932-001 File name: Ch05.doc
Resolving a Low Battery Condition by Replacing the
Battery Pack
CAUTION:
If you are removing the battery pack while the computer
is on, you can prevent loss of information by initiating Suspend
before removing the battery pack. Be sure to replace the discharged
battery pack with a charged one within 10 minutes.
1 Stop working and save your work immediately.
2 Press the suspend button to initiate Suspend.
3 Remove the discharged battery pack.
4 Insert a fully charged battery pack.
5 Press the suspend button again to exit Suspend.
6 Continue your work.
Resolving a Low Battery Condition With
No Power Sources Available
Use one of the following methods:
■
Initiate Hibernation until a power source is available.
■
Turn off the computer until a power source is available.