9-4 Using PC Cards
Writer: Carey Gregg Saved by: Carey Gregg Saved date: 12/19/97 10:37 AM
Part Number: 3147932-001 File name: Ch09.doc
If you are running Windows 95 and your computer is on, the
computer automatically configures a Plug and Play card and most
other PC Cards. If the computer is turned off or in Suspend, a card
is not configured until you turn on the computer or exit Suspend.
Windows NT is not Plug and Play. If you are running Windows
NT, the computer configures a card only when it is in the PC Card
slot when the computer is turned on. The computer only
recognizes that a PC Card has been removed if the card is out of
the slot when the computer is turned on.
For information about each PC Card you use, access its online PC
Card help.
To Next Page
Loading...
