4-6 Using Power and Power Management
Writer: Carey Gregg Saved by: Rebecca Wiggins Saved date: 02/04/98 3:52 PM
Part Number: 314932-001 File name: Ch04.doc
■
System-initiated Suspend
❏
Initiates after five minutes (default) or a user-selected
timeout during normal battery operations.
❏
Initiates when the system reaches a critical low battery
condition and Hibernation has been disabled.
CAUTION:
If Hibernation is disabled, the computer does not initiate
Hibernation when a critical low battery condition is reached. Instead,
it initiates Suspend. When the battery pack fully discharges, all
unsaved data is lost.
NOTE
:
When you close the display while the computer is on, the
screen clears, but the computer does not initiate Suspend.
When Suspend is initiated, the
■
Screen clears.
■
Power/suspend light blinks.
■
Computer beeps twice.
NOTE
:
During Suspend the screen is blank. However, unlike when
the computer is turned off, your information returns to the screen
when the suspend button is pressed.
To Next Page
Loading...
