153 • DM NAX® Product Manual — Doc. 9045M
To mute all audio output from a zone, click its respective Mute button. To unmute the zone, click the
Muted button.
Click Edit to view additional Zone and Output options.
Zone Settings
To configure the settings for an output channel, click the Edit button. The Edit Zone window appears.
Zone
Click Zone to access the settings for Delay.
Delay
To set the delay, do one of the following:
l
Move the Delay Time(ms) slider to the right to increase or to the left to decrease the delay time.
l
Click the ms arrows to increase or decrease the delay. Values range from 0ms to 85ms,
adjustable in increments of 1ms.
l
Manually enter a value in the Delay Time(ms) field.
NOTE: The Delay feature is only available on the line level output channels.
To Next Page
Loading...
Need help?
General
