591 • DM NAX® Product Manual — Doc. 9045M
To Add Certificates
1. Click the corresponding certificate tab.
2. Click the Add Root Certificate button.
3. Click the + Browse button.
4. Locate and select the file, and then click the Open button.
NOTE: If the certificate is a Machine Certificate, enter the password provided by the network
administrator.
5. Click OK. This will add the certificate to the list box, displaying the file name and expiration date.
The certificate is now available for selection and can be loaded to the device.
To Delete Certificates
1. Click the corresponding certificate tab.
2.
Click the trashcan button ( ) in the Actions column to delete the certificate.
3. Click Yes when prompted to delete the certificate or No to cancel the deletion.
Status
The Status tab is the first page displayed when opening the interface of the DM-NAX-BTIO-1G. It
displays general information about the DM-NAX-BTIO-1G (such as Model Name, Firmware Version, and
Serial Number), current network settings (such as Host Name and IP Address, etc.), and input and
output ports' current status.
The Status tab can be accessed at any time by clicking the Status tab of the DM-NAX-BTIO-1G
interface.
Information displayed on the Status tab is organized into different sections.
To Next Page
Loading...
Need help?
General
