2 • DM NAX® Product Manual — Doc. 9045M
DM-NAX-2XLRI-1G
The DM-NAX-2XLRI-1G provides a single-gang wall mount for (2) XLR inputs. The rear of the wall plate
features an Ethernet connection for power and DM NAX® audio-over-IP (AOIP) networking. The rear
panel also features a five-pin line-level audio output for transmitting an audio signal to a Crestron
media wall plate (MP-WP-2XLRO-1G and MP-WP-2RCAO-1G).
l
Two XLR input connectors
l
Two rear-panel line-level audio outputs
l
Single-gang U.S. wall box installation
l
Power over Ethernet (PoE) network powered
l
Mountable in a standard US electrical box or on a rack rail via included hardware
l
Connects directly to a managed network to route to or from other DMNAX® and DMNVX®
devices
l
Interoperable with Dante® audio networking devices via AES67 compatibility
l
Streamlined configuration through a web interface
l
Seamless Crestron system integration with SIMPL Windows programming
Audio-over-IP
DM NAX takes audio distribution to a whole new level by putting it on the network. The DM-NAX-2XLRI-
1G sends and receives DM NAX and AES67 encoded audio over a standard IP network. A single DM NAX
system can handle audio distribution between 32 DM NAX devices and supports up to 256 audio output
zones. DM NAX devices can seamlessly pull and distribute the audio from DM NVX sources.
To Next Page
Loading...
Need help?
General
