Crestron DM NAX X-Series User Manual

Product Manual — Doc. 9045M DM NAX® • 55
DM-NAX-AUD-IO Specifications
Product specifications for the DM-NAX-AUD-IO are provided below.
Specifications
Audio
Input Signal Types Balanced/unbalanced stereo analog line-level;
DMNAX/AES67 audio-over-IP
Output Signal Types Balanced/unbalanced stereo analog line-level;
DMNAX/AES67 audio-over-IP
Source Compensation ±10.0dB per input
Input Monitoring Source Signal Detect
Frequency Response (at
line-level output)
20Hz to 20kHz ±0.5dB
THD+N (at line-level
output)
0.005% @ 1kHz, max output
S/N Ratio (at line-level
output)
From line-level input: 110dB, 20Hz to 20kHz, A-weighted;
From digital input: 113dB, 20Hz to 20kHz, A-weighted
Balance Control Left/right adjustable
EQ Filter Types EQ, High Pass, Low Pass, Treble Shelf, Bass Shelf, Notch
EQ Center Frequency 10 to 20,000Hz per band
EQ Gain +20/-40dB per band
EQ Bandwidth 0.1 to 4.0octaves per band
Communications
Ethernet For control and PoE, AoIP, and/or console, 100/1000Mbps, auto-switching, auto-
negotiating, auto-discovery, full/half duplex, DHCP
Connectors
INPUTS (1) 5-pin 3.5mm detachable terminal block;
Balanced/unbalanced line-level audio inputs;
Maximum Input Level: +21dBu (8.7Vrms);
Input Impedance: 10kΩ
OUTPUTS (1) 5-pin 3.5mm detachable terminal block;
Balanced/unbalanced line-level audio outputs;
Maximum Output Level: +21dBu (8.7Vrms);
Channel separation: 100dB @ 1kHz;
Output Impedance: 400Ω
G (1) 6-32 screw;
Chassis ground lug

Crestron DM NAX X-Series Specifications

General

Brand	Crestron
Model	DM NAX X-Series
Category	Amplifier
Language	English