407 • DM NAX® Product Manual — Doc. 9045M
DM-NAX-AMP-X300
This section describes how to configure the DM-NAX-AMP-X300.
Web Interface Configuration
The DM-NAX-AMP-X300 web interface allows you to view status information and configure network
and device settings.
NOTE: Throughout the web interface, values can be entered manually. When values entered
manually fall out of the range, the value will be maximized or minimized or have no effect.
Access the Web Interface
To access the web interface, do either of the following:
l
Access the Web Interface with a Web Browser on page 408
l
Access the Web Interface With the Crestron Toolbox™ Application on page 472
The web interface is accessed from a web browser. The following table lists operating systems and their
corresponding supported web browsers.
OPERATING SYSTEM SUPPORTED WEB BROWSERS
Windows® operating system Chrome™ web browser, version 31 and later
Firefox® web browser, version 31 and later
Internet Explorer web browser, version 11 and later
Microsoft Edge web browser
macOS® operating system Safari® web browser, version 6 and later
Chrome web browser, version 31 and later
Firefox web browser, version 31 and later
Operating System and Supported Web Browsers
To Next Page
Loading...
Need help?
General
