Product Manual — Doc. 9045M DM NAX® • 406
Access the Web Interface With the Crestron Toolbox™
Application
To access the web interface by opening a web browser within the Crestron Toolbox™ application, do the
following:
1. Open the Crestron Toolbox application.
2. From the Tools menu, select Device Discovery Tool. You can also access the Device Discovery Tool
by clicking the Device Discovery Tool button ( ) in the Crestron Toolbox toolbar. The
DM-NAX-16AIN is discovered and listed in the device list on the left side of the screen. The
associated host name, IP address, and firmware version are also displayed.
NOTE: If there is security software running on the computer, a security alert might be
displayed when the Crestron Toolbox application attempts to connect to the network. Make
sure to allow the connection, so that the Device Discovery Tool can be used.
3. In the Device Discovery Tool list, double-click your device.
4. Enter your credentials in the Authentication Required dialog that opens, and then click Log In.
5. Click the Web Configuration button in the Configuration page displayed on the left side of the
Device Discovery Tool.
To Next Page
Loading...
Need help?
General
