48 • DM NAX® Product Manual — Doc. 9045M
DM-NAX-16AIN Specifications
Product specifications for the DM-NAX-16AIN are provided below.
Specifications
Audio
Input Signal Types 8 stereo unbalanced analog (RCA) includes (4) 5-pin phoenix balanced connector;
8 digital SPDIF (4 TOSLINK® and 4 Coaxial)
Source Compensation ±10.0 dB per input
Input Monitoring Source Signal Detect
THD 0.002%
S/N Ratio 110 dB digital in, 108 dB analog in
Frequency Response 20 Hz to 20 kHz (±0.6 dB)
Supported Sample Rates Coaxial:Up to 192 kHz;
Optical: 192 kHz
Communications
Ethernet For control, AoIP, and or console, 100/1000 Mbps, auto-switching, auto-negotiating,
auto-discovery, full/half duplex, DHCP
USB For configuration management
Connectors
ANALOG SOURCES L/R
1 – 8
(8) RCA female comprising (4) unbalanced stereo line-level audio inputs;
(4) 5-pin phoenix balanced connector
Input Impedance: 10k Ohms;
Maximum Input Level: 2 Vrms
SPDIF SOURCES 9 – 12 (4) JIS F05 female (TOSLINK) optical fiber connector;
S/PDIF optical digital audio input
SPDIF SOURCES 13 – 16 (4) RCA female;
S/PDIF coaxial digital audio inputs;
Input Impedance: 75 Ohms
Ethernet 1 (1) 8-wire RJ45 female; 100Base-T/1000Base-TX Ethernet port
Ethernet 2 (1) 8-wire RJ45 female; 100Base-T/1000Base-TX Ethernet port
USB (1) USB Type B connector, female;
USB computer console port (cable included);
For setup only
100-240V~50/60Hz
Universal AC
(1) IEC 60320 C14 main power inlet, mates with removable power cord (included)
G 6-32 screw, chassis ground lug
To Next Page
Loading...
Need help?
General
