277 • DM NAX® Product Manual — Doc. 9045M
1. To select a tone profile preset for the zone, select an option from the Tone Profile drop-down
menu. The available options are Off, Classical, Jazz, Pop, Rock, and Spoken Word. By default, Off
is selected.
2. Bass: To adjust the bass, do one of the following:
l
Move the Bass slider to the right to increase or to the left to decrease the bass.
l
Click the db arrows to increase or decrease the db. Values range from -12 db to 12 db,
adjustable in increments of 1 db.
l
Manually enter a value in the Bass field.
3. Treble: To adjust the treble, do one of the following:
l
Move the Treble slider to the right to increase or to the left to decrease the treble.
l
Click the db arrows to increase or decrease the db. Values range from -12 db to 12 db,
adjustable in increments of 1 db.
l
Manually enter a value in the Treble field.
4. To enable the loudness setting on the zone output, slide the Loudness switch to the right. To
disable loudness, slide the Loudness switch to the left.
5. The Night Mode feature applies subtle processing to restrict the dynamic range of the zone audio,
to allow for lower listening levels at night or in rooms where higher listening levels would be
disruptive. To select a dynamics processing level, select an option from the Night Mode drop-down
menu. The available options are Off, Low, Medium, and High. By default, Off is selected.
Balance
To adjust the left/right balance of the stereo output signal, do one of the following:
l
Move the Balance slider to the right to shift the stereo balance to the right channel or to the left
to shift the balance to the left.
l
Click the arrows to adjust the balance left or right. The up arrow shifts the balance to the right
while the down arrow shifts the balance to the left.
l
Manually enter a value in the Balance field. Values range from -50 to 50, adjustable in increments
of 1. Positive values shift the balance to the right while negative values shift the balance to the
left.
Delay
To set the delay, do one of the following:
To Next Page
Loading...
Need help?
General
