36 • DM NAX® Product Manual — Doc. 9045M
DM-NAX-8ZSA Specifications
Product specifications for the DM-NAX-8ZSA are provided below.
Specifications
Audio
Input Signal Types 4 stereo analog (RCA);
4 digital S/PDIF (2 TOSLINK® and 2 Coaxial)
Output Signal Types 4 stereo analog outputs (mirrors speaker zone outputs 1-4), Outputs 1 and 2 have a
balanced 5-pin stereo Phoenix connection and an unbalanced RCA connection
Sampling Rates and Bit
Depths
Digital Input (Coaxial): Up to 192 kHz,
24-bit;
Digital Input (Optical): Up to 96 kHz,
24-bit;
Media Players: Up to 192 kHz, 24-bit
Source Compensation ±10.0 dB per input
Input Monitoring Source Signal Detect
Output Power 150 Watts per channel at 8 Ohms;
300 Watts per channel at 4 Ohms;
500 Watts per channel at 8 Ohms bridged
Amplifier Monitoring Over Current, Over/Under Voltage, Over Temperature, DC Offset, Clipping
Frequency Response 20 Hz to 20 kHz ±0.6 dB
THD 0.006%
S/N Ratio 110 dB digital in, 108 dB analog in
Stereo Separation 85 dB @ 1 kHz, 8 ohm;
80 dB @ 1 kHz, 4 ohm
Zone Separation 100 dB @ 1 kHz, 8 ohm;
95 dB @ 1 kHz, 4 ohm
Zone Volume Level Control -80.0 to +20.0 dB, adjustable from 0% to 100% plus mute
Bass Control ±12.0 dB
Treble Control ±12.0 dB
Loudness Compensation On/Off
Dynamic Range Control Off/Low/Medium/High
Balance Control Left/right adjustable
Zone Configuration Stereo Single Ended, Mono Single Ended, Stereo Bridged, Mono Bridged, Bridged 2.1,
and Bridged 2.1 with Bridged Sub
Power Limiting Configurable 5 to 150 Watts @ 8 Ohms;
5 to 300 Watts @ 4 Ohms;
5 to 500 Watts @ 8 Ohms bridged
Tone Profiles Flat, Classical, Jazz, Pop, Rock, Spoken Word
To Next Page
Loading...
Need help?
General
