Product Manual — Doc. 9045M DM NAX® • 27
DM-NAX-AUD-IO
The DM-NAX-AUD-IO is a DM NAX® encoder and decoder with support for analog line-level audio input
and output. The device is housed in a versatile form factor that can be mounted in a single-gang
standard electrical box, under a table, or on a rack rail. An additional polycarbonate label is included with
rotated text to make the front panel more legible in electrical box installations. The rear panel of the
device features an Ethernet connection for PoE, Audio over IP (AoIP), and control.
l
Line-level, balanced/unbalanced analog audio input and output via detachable terminal block
connectors
l
Power over Ethernet (PoE) network powered
l
Mountable in a standard US electrical box, under a table, or on a rack rail via included hardware
l
Connects directly to a managed network to route to or from other DM NAX® and DM NVX®
devices
l
Interoperable with Dante® audio networking devices via AES67 compatibility
l
Streamlined configuration through a web interface
l
Seamless Crestron system integration with SIMPL Windows programming
Audio-over-IP
DMNAX takes audio distribution to a whole new level by putting it on the network. The
DM-NAX-AUD-IO sends and receives DMNAX and AES67 encoded audio over a standard IP network. A
single DMNAX system can handle audio distribution between 32 DMNAX devices and supports up to
256 audio output zones. DMNAX devices can seamlessly pull and distribute the audio from DMNVX
sources.
Digital Signal Processing (DSP)
DSP capabilities such as bass and treble boost and cut, loudness, adjustable delay, tone profiles, and a
full 10-band EQ per output are available on each output channel of the DM-NAX-AUD-IO.
Encoder and Decoder Functionality
The DM-NAX-AUD-IO can operate as a network AV encoder and decoder. The local input sources on the
adapter can be sent as AoIP streams to DM NAX, Dante, or AES67 capable devices. Simultaneously, the
DM-NAX-AUD-IO can receive AoIP streams from these same devices and decode them for local output.