22 • DM NAX® Product Manual — Doc. 9045M
❶
PWR: (1) LED, indicates operating power is supplied; illuminates white when
powered on, red when in standby (no audio or LAN connection), and off when no
power is supplied.
❷
LAN: (1) LED, illuminates white when the device is connected to a network with a
valid IP address, and off when the device is not connected to a network or the IP
address is invalid.
❸
NAX: (1) LED, illuminates white when the AoIP is ready to pass and the unit's
PTP clock is synced, and off when there is no AoIP is passing to or from an
amplifier and/or PTP is not synced.
❹
SOURCE: (4) LEDs, illuminates white when a signal is detected on the specified
input/source, red when there is clipping on an analog input or bitstream audio
detected on a digital input, and off when there is no signal detected on the
specified input/source.
❺
ZONE: (4) LEDs, illuminates white when there is audio output on the indicated
zone, red when clipping is detected on the output audio.
To Next Page
Loading...
Need help?
General
