Crestron DM NAX X-Series User Manual

Product Manual — Doc. 9045M DM NAX® • 33
Connectors
INPUTS1-2 (2) Balanced XLRinput ports
Line or microphone-level audio inputs;
Mic-level maximum gain: 60dB
Mic-level maximum signal level: 2Vrms;
Mic-level channel separation: 70dB @ 60dB gain @ 1kHz;
Line-level maximum signal level: +21dBu (8.7Vrms)
Impedance: >10kΩ;
+48V phantom power is available when used as mic-level inputs
OUTPUTL-R (1) 5-pin 3.5 mm screw terminal block;
Balanced line-level audio output;
Pins 1-2:Left channel output;
Pin 3: Shared ground;
Pins 4-5:Right channel output;
Maximum signal level: +14.7dBu (4.2Vrms)
Impedance: 200Ω;
Channel separation: 100dB @ 1kHz
G (1) 6-32 screw;
Chassis ground lug
ETHERNET PoE (1) 8-pin RJ-45 connector, female;
100BASE-TX/1000BASE-T Ethernet port
Controls and Indicators
ETHERNET PoE Left amber LED indicates 1000Mb link status;
Left green LED indicates 100Mb link status;
Flashing right amber LED indicates Ethernet activity
SETUP (1) Push button: Used for factory reset procedures;
(1) LED, illuminates red when the button is pressed, flashes red when reset has been
initiated
Power
PoE IEEE 802.3af Class 0 (12.95W) compliant;
Compatible with IEEE 802.3af compliant Ethernet switch or third-party PoE
compliant PSE
Power Consumption 2.9W
Environmental
Temperature 32° to 95° F (0° to 35° C)
Humidity 10% to 95% RH (noncondensing)
Heat Dissipation 9.9BTU/hr
Construction
Chassis Metal, black and silver finish, vented sides
Mounting Mountable on the following:
1-gang U.S. electrical box or plaster ring (not included), 3.5 in. (26 mm) electrical box
depth recommended;
Rack rail

Crestron DM NAX X-Series Specifications

General

Brand	Crestron
Model	DM NAX X-Series
Category	Amplifier
Language	English