563 • DM NAX® Product Manual — Doc. 9045M
The Tone section provides adjustments for the Tone Profile, Bass, Treble, Loudness, and Night Mode
settings of the zone output.
NOTE: The Tone Profile, Bass, Treble, and Loudness settings in the Tone section are all applied
separately from the Equalizer Settings for the zone. This means that any adjustments made in the
Tone section will stack with those made in the Equalizer Settings section.
1. To select a tone profile preset for the zone, select an option from the Tone Profile drop-down
menu. The available options are Off, Classical, Jazz, Pop, Rock, and Spoken Word. By default, Off
is selected.
2. Bass: To adjust the bass, do one of the following:
l
Move the Bass slider to the right to increase or to the left to decrease the bass.
l
Click the db arrows to increase or decrease the db. Values range from -12 db to 12 db,
adjustable in increments of 1 db.
l
Manually enter a value in the Bass field.
3. Treble: To adjust the treble, do one of the following:
l
Move the Treble slider to the right to increase or to the left to decrease the treble.
l
Click the db arrows to increase or decrease the db. Values range from -12 db to 12 db,
adjustable in increments of 1 db.
l
Manually enter a value in the Treble field.
4. To enable the loudness setting on the zone output, slide the Loudness switch to the right. To
disable loudness, slide the Loudness switch to the left.
To Next Page
Loading...
Need help?
General
