D-Link xStack DGS-3620 Series - Page 1035

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1030
Restrictions
None.
Example
This example shows how to display PFC infomation on all the ports.
DGS-3620-28PC:admin#show pfc
Command: show pfc
Port PFC Admin PFC On Oper PFC On Will- Rx PFC Tx PFC
Cap. Priorities Priorities ing Frame(s) Frame(s)
--------------------------- ---------------- --------------------------
1:1 8 Off 0 0
1:2 8 Off 0 0
1:3 8 Off 0 0
1:4 8 Off 0 0
1:5 8 Off 0 0
1:6 8 Off 0 0
1:7 8 Off 0 0
1:8 8 Off 0 0
1:9 8 Off 0 0
1:10 8 Off 0 0
1:11 8 Off 0 0
1:12 8 Off 0 0
1:13 8 Off 0 0
1:14 8 Off 0 0
1:15 8 Off 0 0
1:16 8 Off 0 0
1:17 8 Off 0 0
1:18 8 Off 0 0
1:19 8 Off 0 0
1:20 8 Off 0 0
1:21 8 Off 0 0
1:22 8 Off 0 0
1:23 8 Off 0 0
1:24 8 Off 0 0
1:25 8 Off 0 0
1:26 8 (2) On 0 0
DGS-3620-28PC:admin#
89-4 clear pfc counters
Description
This command is used to clear the PFC counters of the specified interface(s).
Format
clear pfc counters {<portlist>} [rx | tx | both]