xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1031
Parameters
<portlist> - (Optional) Enter the 10G port list that will be used for this configuration here.
rx - Specifies to clear the received PFC frames counters.
tx - Specifies to clear the transmitted PFC frames counters.
both - Specifies to clear both the received and transmitted PFC frames counters.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
This example shows how to clear transmitted PFC frames counters on port 26.
DGS-3620-28PC:admin#clear pfc counters 1:26 tx
Command: clear pfc counters 1:26 tx
Success.
To Next Page
Loading...
