xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1054
Parameters
<portlist> - The range of ports to display. If no parameter is specified, the DSCP mapping for all
ports will be displayed.
dscp_priority - Specifies the list of DSCP values to be mapped to a specific priority.
dscp_dscp - Specifies the list of DSCP values to be mapped to a specific DSCP.
dscp - This specifies the DSCP value that will be mapped.
<dscp_list> - Enter the dscp list number here.
Restrictions
Only Administrators and Operators can issue this command.
Example
In the case of a product supporting per port configuration.,To show the DSCP map configuration
on port 1:1.
DGS-3620-28PC:admin#show dscp map 1 dscp_priority
Command: show dscp map 1:1 dscp_priority
DSCP to 802.1p Priority Mapping:
Port 1:1
DSCP 0-7 is mapped to 0
DSCP 8-15 is mapped to 1
DSCP 16-23 is mapped to 2
DSCP 24-31 is mapped to 3
DSCP 32-39 is mapped to 4
DSCP 40-47 is mapped to 5
DSCP 48-55 is mapped to 6
DSCP 56-63 is mapped to 7
In the case of a product only supporting global configuration. To show the DSCP map
configuration:
DGS-3620-28PC:admin#show dscp map 1 dscp_dscp
Command: show dscp map 1:1 dscp_dscp
DSCP to DSCP Mapping:
--------------------------------------------------------------
Port 1:1 | 0 1 2 3 4 5 6 7 8 9
-----------+--------------------------------------------------
0 | 0 1 2 3 4 5 6 7 8 9
1 | 10 11 12 13 14 15 16 17 18 19
2 | 20 21 22 23 24 25 26 27 28 29
3 | 30 31 32 33 34 35 36 37 38 39
4 | 40 41 42 43 44 45 46 47 48 49
5 | 50 51 52 53 54 55 56 57 58 59
6 | 60 61 62 63
--------------------------------------------------------------
To Next Page
Loading...
