D-Link xStack DGS-3620 Series - Page 1060

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1055
91-20 show 802.1p queue statistics
Description
This command is used to display the per queue counters for each port..
Format
show 802.1p queue statistics port <port>
Parameters
<port> - Specifies the port to be displayed.
Restrictions
All-level users can issue this command.
Example
To display the per queue counters for port 1:
DGS-3620-28PC:admin#show 802.1p queue statistics port 1
Command: show 802.1p queue statistics port 1:1
Notes:
(1)Min Bandwidth: minimum bandwidth setting, associated with per queue
bandwidth control, if user doesn't configure it, the min bandwidth will be 0.
(2)Max Bandwidth: maximum bandwidth setting, associated with per queue
bandwidth control, if user doesn't configure it, the max bandwidth will be the
current port's link speed.
Queue Min Bandwidth Packets/sec Total packets Drop packets
Max Bandwidth Bytes/sec Total Bytes Drop Bytes
-------------------------------------------------------------------------------
0 0 0 0 0
0 0 0 0
-------------------------------------------------------------------------------
1 0 0 0 0
0 0 0 0
-------------------------------------------------------------------------------
2 0 0 0 0
0 0 0 0
-------------------------------------------------------------------------------
3 0 0 0 0
0 0 0 0
-------------------------------------------------------------------------------
4 0 0 0 0
0 0 0 0
-------------------------------------------------------------------------------
5 0 0 0 0
0 0 0 0
-------------------------------------------------------------------------------
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh