D-Link xStack DGS-3620 Series - Page 1102

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1097
DGS-3620-28PC:admin#
98-8 show execute_config
Description
This command is used to show all of scheduled execution.
Format
show execute_config
Parameters
None.
Restrictions
None.
Example
Delete all the schedule of the executed configuration:
DGS-3620-28PC:admin# show execute_config
Command: show execute_config
Time Range : aa
Filename : c:/3620.cfg
Method : Reset
State : Disabled
Total Entries: 1
DGS-3620-28PC:admin#
98-9 execute config
Description
This command is used to execute configuration on file system. The result of every command will
be displayed.
Format
execute config <pathname> {increment}
Parameters
config - The filename of the configuration on file system.
<pathname> - Enter the path name of the configuration.