D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1098
increment - If this option is null, the current configuration will be reset before execute the
configuration. If this option is available, the current configuration will not be reset before
execute the configuration.
Restrictions
Only Administrators can issue this command.
Example
To load and execute a configuration:
DGS-3620-28PC:admin#execute config config-vlan-0
Command: execute config config-vlan-0
Read configuration config-vlan-0 failure.
Fail!
DGS-3620-28PC:admin#
To load and execute a configuration:
DGS-3620-28PC:admin#execute config config-vlan-1 increment
Command: execute config config-vlan-1 increment
Success.
DGS-3620-28PC:admin#config temperature threshold high 79
Command: config temperature threshold high 79
Success.
DGS-3620-28PC:admin#config temperature threshold low 11
Command: config temperature threshold low 11
Failure.
DGS-3620-28PC:admin#config temperature trap state enable
Command: config temperature trap state enable
Success.
DGS-3620-28PC:admin#config temperature log state enable
Command: config temperature log state enable
Success.
DGS-3620-28PC:admin#

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English