D-Link xStack DGS-3620 Series - Page 1114

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1109
DGS-3620-28PC:admin#config sflow flow_sampler ports all rate 1
Command: config sflow flow_sampler ports all rate 1
Success.
DGS-3620-28PC:admin#
100-10 delete sflow flow_sampler ports
Description
This command is used to delete the sFlow flow sampler.
Format
delete sflow flow_sampler ports [<portlist> | all]
Parameters
<portlist> - Enter the list of ports to be deleted.
all - Specifies to delete all ports.
Restrictions
Only Administrators and Operators can issue this command.
Example
To delete the sFlow flow sampler for ports 1 to 3:
DGS-3620-28PC:admin#delete sflow flow_sampler ports 1-3
Command: delete sflow flow_sampler ports 1-3
Success.
DGS-3620-28PC:admin#
100-11 show sflow flow_sampler
Description
This command is used to display sFlow sampler information for the ports that have been created.
Format
show sflow flow_sampler
Parameters
None.