D-Link xStack DGS-3620 Series - Page 1124

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1119
Example
To transfer to commander:
DGS-3620-28PC:admin#config sim commander
Command: config sim commander
Success.
DGS-3620-28PC:admin#
To transfer to candidate:
DGS-3620-28PC:admin#config sim candidate
Command: config sim candidate
Success.
DGS-3620-28PC:admin#
To update the name of a group:
DGS-3620-28PC:admin#config sim commander group_name mygroup
Command: config sim commander group_name mygroup
Success.
DGS-3620-28PC:admin#
To change the time interval of discovery protocol:
DGS-3620-28PC:admin#config sim dp_interval 30
Command: config sim dp_interval 30
Success.
DGS-3620-28PC:admin#
To change the hold time of discovery protocol:
DGS-3620-28PC:admin#config sim hold_time 200
Command: config sim hold_time 200
Success.
DGS-3620-28PC:admin#
101-7 download sim_ms
Description
This command is used to download firmware or configuration from a TFTP server to indicated
devices.