To Next Page

To Previous Page

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide

1137

Command: enable community_encryption

Success.

DGS-3620-28PC:admin#

When creating an SNMP community string after the encryption state has been enabled, the

community string will be displayed as an encrypted string (six "*"), otherwise displayed as plaintext,

for example:

DGS-3620-28PC:admin# show snmp community

Command: show snmp community

SNMP Community Table

Community Name View Name Access Right

--------------------- --------------------- ------------

****** CommunityView read_write

****** CommunityView read_only

private CommunityView read_write

public CommunityView read_only

Total Entries : 4

DGS-3620-28PC:admin#

102-21 disable community_encryption

Description

This command is used to disable the encryption state on the SNMP community string.

Format

disable community_encryption

Parameters

None.

Restrictions

Only Administrator level users can issue this command.

Example

To disable the encryption state on the SNMP community string:

DGS-3620-28PC:admin# disable community_encryption

Command: disable community_encryption

Success.

D-Link xStack DGS-3620 Series User Manual

Questions and Answers: