D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1203
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To set the aging time of the surveillance VLAN to 60 minutes:
DGS-3620-28PC:admin#config surveillance_vlan aging_time 60
Command: config surveillance_vlan aging_time 60
Success.
DGS-3620-28PC:admin#
111-7 config surveillance_vlan log state
Description
This command is used to configure the log state of the surveillance VLAN.
Format
config surveillance_vlan log state [enable | disable]
Parameters
enable - Specifies to enable the log state of the surveillance VLAN.
disable - Specifies to disable the log state of the surveillance VLAN.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the log state of the surveillance VLAN:
DGS-3620-28PC:admin#config surveillance_vlan log state enable
Command: config surveillance_vlan log state enable
Success.
DGS-3620-28PC:admin#
111-8 show surveillance_vlan
Description
This command is used to display the surveillance VLAN information.

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English