D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1249
Restrictions
Only Administrator-level users can issue this command.
Example
To clear the current username of the RCP global server:
DGS-3620-28PC:admin#config rcp server clear username
Command: config rcp server clear username
Success.
DGS-3620-28PC:admin#
119-15 show rcp server
Description
This command is used to display Remote Copy Protocol (RCP) global server information.
Format
show rcp server
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display RCP global server information:
DGS-3620-28PC:admin#show rcp server
Command: show rcp server
RCP Server Address :
RCP Server Username : travel
DGS-3620-28PC:admin#
119-16 ping
Description
This command is used to send Internet Control Message Protocol (ICMP) echo messages to a
remote IP address. The remote IP address will then “echo” or return the message. This is used to
confirm connectivity between the switch and the remote device.

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English