D-Link xStack DGS-3620 Series - Page 127

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
122
==============================================================================
==============================================================================
Profile ID: 4 Type: User Defined
Mask on
Offset 0-15 : 0x00000000 0x00000000 0x00000000 0x00000000
Offset 16-31 : 0x00000000 0x00000000 0x00000000 0x00000000
Offset 32-47 : 0x00000000 0x00000000 0x00000000 0x00000000
Offset 48-63 : 0x00000000 0x00000000 0x00000000 0x00000000
Offset 64-79 : 0x00000000 0x00000000 0x00000000 0x00000000
Unused Rule Entries: 99
------------------------------------------------------------------------------
Rule ID : 1 Ports: 1
Match on
Offset 0-15 : 0x00000000 0x00000000 0x00000000 0x00000000
Offset 16-31 : 0x00000000 0x00000000 0x00000000 0x00000000
Offset 32-47 : 0x00000000 0x00000000 0x00000000 0x00000000
Offset 48-63 : 0x00000000 0x00000000 0x00000000 0x00000000
Offset 64-79 : 0x00000000 0x00000000 0x00000000 0x00000000
Action:
Permit
==============================================================================
DGS-3620-28PC:admin#
5-12 enable cpu_interface_filtering
Description
This command is used to enable CPU interface filtering.
Format
enable cpu_interface_filtering
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable CPU interface filtering: