D-Link xStack DGS-3620 Series - Page 1286

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1281
<vidlist> - Enter the VLAN ID.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To associate secondary VLAN to private VLAN p1:
DGS-3620-28PC:admin#config private_vlan p1 add community vlanid 2-5
Command: config private_vlan p1 add community vlanid 2-5
Success.
DGS-3620-28PC:admin#
121-17 show private_vlan
Description
This command is used to display private VLAN information on the switch.
Format
show private_vlan {[<vlan_name 32> | vlanid <vidlist>]}
Parameters
<vlan_name 32> - (Optional) Specifies the name of the private VLAN. The maximum length is 32
characters.
vlanid - (Optional) Specifies the VLAN ID of the private VLAN.
<vidlist> - Enter the VLAN ID of the private VLAN.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To display private VLAN settings:
DGS-3620-28PC:admin#show private_vlan
Command: show private_vlan
Private VLAN 100
------------------
Promiscuous Ports: 1
Trunk Ports : 2
Isolated Ports : 3-5 Isolated VLAN : 20
Community Ports : 6-8 Community VLAN: 30