D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1295
DGS-3620-28PC:admin#enable voice_vlan v2
Command: enable voice_vlan v2
Success.
DGS-3620-28PC:admin#
124-2 disable voice_vlan
Description
This command is used to disable the voice VLAN function on a switch. When the voice VLAN
function is disabled, the voice VLAN will become unassigned.
Format
disable voice_vlan
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To disable voice VLAN:
DGS-3620-28PC:admin#disable voice_vlan
Command: disable voice_vlan
Success.
DGS-3620-28PC:admin#
124-3 config voice_vlan priority
Description
This command is used to configure voice VLAN priority. The voice VLAN priority will be the priority
associated with the voice VLAN traffic to distinguish the QoS of the voice traffic from data traffic.
Format
config voice_vlan priority <int 0-7>
Parameters
<int 0-7> - Enter the priority of the voice VLAN. The range is 0 to 7. The default priority is 5.

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English