D-Link xStack DGS-3620 Series - Page 1352

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1347
ipv6addr: IPv6 address
macaddr: MAC address
unitID: The unit ID
portNum : The port number
Event description: Dynamic IMPB entry conflicts with static IMPB.
Log Message: Dynamic IMPB entry conflicts with static IMPB(IP:
[<ipaddr> | <ipv6addr>], MAC: <macaddr>, Port
<[unitID:]portNum>).
Parameters description:
ipaddr: IP address
ipv6addr: IPv6 address
macaddr: MAC address
unitID: The unit ID
portNum : The port number
Warning
Event description: Creating IMPB entry failed due to no ACL rule
being available.
Log Message: Creating IMPB entry failed due to no ACL rule being
available(IP:[<ipaddr> | <ipv6addr>], MAC: <macaddr>, Port
<[unitID:]portNum>)
Parameters description:
ipaddr: IP address
ipv6addr: IPv6 address
macaddr: MAC address
unitID: The unit ID
portNum : The port number
Warning
Event description: IMPB checks a host illegal.
Log Message: Unauthenticated IP-
MAC address and discarded by
IMPB (IP: [< ipaddr > | < ipv6addr >], MAC :< macaddr >, Port
<[unitID:]portNum >).
Parameters description:
ipaddr: IP address
ipv6addr: IPv6 address
macaddr: MAC address
unitID: The unit ID
portNum : The port number
Warning
Event description: Dynamic IMPB entry conflicts with static ND
Log Message: Dynamic IMPB entry conflicts with static ND (IP: [<
ipaddr > | < ipv6addr >], MAC: <macaddr>, Port
<[unitID:]portNum>)
Parameters description:
ipaddr: IP address
ipv6addr: IPv6 address
macaddr: MAC address
unitID: The unit ID
portNum : The port number
Warning
Event description: Port shutdown due to the DHCP rate excludes
the rate limiting.
Log Message: Port < [unitID:] portNum> is currently shut down
due
to the DHCP rate excludes the rate limiting.
Parameters description:
unitID: The unit ID
portNum : The port number
Warning
Event description: Port recovery due to the DHCP auto-recovery
timer is timeout.
Log Message: Port < [unitID:] portNum> is currently recovery due
to the DHCP auto-recovery timer is timeout.
Parameters description:
unitID: The unit ID
portNum : The port number
Informational
Traffic Control
Event description: Broadcast storm occurrence.
Log Message: Port <portNum> Broadcast storm is occurring.
Parameters description:
portNum: The port number.
Warning
Event description: Broadcast storm cleared.
Log Message: Port <portNum> Broadcast storm has cleared.
Parameters description:
portNum: The port number.
Informational
Event description: Multicast storm occurrence.
Warning