D-Link xStack DGS-3620 Series - Page 1353

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1348
Log Message: Port <portNum> Multicast storm is occurring.
Parameters description:
portNum: The port number.
Event description: Multicast Storm cleared.
Log Message: Port <portNum>Multicast storm has cleared.
Parameters description:
portNum: The port number.
Informational
Event description: Port shut down due to a packet storm
Log Message: Port <portNum> is currently shut down due to a
packet storm
Parameters description:
portNum: The port number.
Warning
DHCP Server
Screening
Event description: Detected untrusted DHCP server IP address.
Log Message: Detected untrusted DHCP server(IP: <ipaddr>,
Port <portNum> )
Parameters description:
ipaddr: The untrusted IP address which has beenis detected with
our device.
portNum : Represent the logic port number of the device.
Informational
DHCPv6 Server
Screening
Event Description: Detected untrusted DHCPv6 server IP address
Log Message: Detected untrusted DHCPv6 server (IP: <ipv6addr>,
Port:<[unitID:]portNum> )
Parameters Description:
ipv6addr: The untrusted source IP of DHCPv6 server which has
been detected with our device.
unitID: The unit ID.
Informational
ICMPv6 Router
Advertisement
Filter
Event Description: Detected untrusted source IP in ICMPv6 Router
Advertisement Message.
Log Message: Detected untrusted source IP of ICMPv6 Router
Advertisement message (IP: <ipv6addr>, Port:<[unitID:]portNum> )
Parameters Description:
Ipv6addr: The untrusted ICMPv6 Router Advertisement address
which has been detected with our device
unitID: The unit ID.
portNum: The port number.
Informational
ERPS
Event description: Signal failure detected
Log Message: Signal failure detected on node (MAC: <macaddr>)
Parameters description:
macaddr: The system MAC address of the node
Notice
Event description: Signal failure cleared
Log Message: Signal failure cleared on node (MAC: <macaddr>)
Parameters description:
macaddr: The system MAC address of the node
Notice
Event description: RPL owner conflict
Log Message: RPL owner conflicted on the ring (MAC:
<macaddr>)
Parameters description:
macaddr: The system MAC address of the node
Warning
MSTP Debug
Enhancement
Event description: Topology changed.
Log Message: Topology changed
[( [Instance:<InstanceID> ] ,port:<[unitID:] portNum> ,MAC:
<macaddr>)]
Parameters description:
InstanceID: Instance ID.
portNum:Port ID
macaddr: MAC address
Notice
Event description: Spanning Tree new Root Bridge
Log Message: [CIST | CIST Regional | MSTI Regional] New Root
bridge selected( [Instance: <InstanceID> ]MAC: <macaddr>
Priority :<value>)
Parameters description:
InstanceID: Instance ID.
macaddr: Mac address
value: priority value
Informational
Event description: Spanning Tree Protocol is enabled
Log Message: Spanning Tree Protocol is enabled
Informational
Event description: Spanning Tree Protocol is disabled
Informational