D-Link xStack DGS-3620 Series - Page 1354

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1349
Log Message: Spanning Tree Protocol is disabled
Event description: New root port
Log Message: New root port selected [( [Instance:<InstanceID> ],
port:<[unitID:] portNum>)]
Parameters description:
InstanceID: Instance ID.
portNum:Port ID
Notice
Event description: Spanning Tree port status changed
Log Message: Spanning Tree port status changed
[( [Instance:<InstanceID> ], port:<[unitID:] portNum>)]
<old_status>
-> <new_status>
Parameters description:
InstanceID: Instance ID.
portNum: Port ID
old_status: Old status
new_status: New status
Notice
Event description: Spanning Tree port role changed.
Log Message: Spanning Tree port status changed.
[( [Instance:<InstanceID> ], port:<[unitID:] portNum>)] <old_role> -
> <new_role>
Parameters description:
InstanceID: Instance ID.
portNum:Port ID/
old_role: Old role
new_status:New role
Informational
Event description: Spannnig Tree instance created.
Log Message: Spanning Tree instance created.
Instance:<InstanceID>
Parameters description:
InstanceID: Instance ID.
Informational
Event description: Spannnig Tree instance deleted.
Log Message: Spanning Tree instance deleted.
Instance:<InstanceID>
Parameters description:
InstanceID: Instance ID.
Informational
Event description: Spanning Tree Version changed.
Log Message: Spanning Tree version changed. New
version:<new_version>
Parameters description:
new_version: New STP version.
Informational
Event description: Spanning Tree MST configuration ID name and
revision level changed.
Log Message: Spanning Tree MST configuration ID name and
revision level changed (name:<name> ,revision level
<revision_level>).
Parameters description:
name : New name.
revision_level:New revision level.
Informational
Event description: Spanning Tree MST configuration ID VLAN
mapping table deleted.
Log Message: Spanning Tree MST configuration ID VLAN
mapping table changed (instance: <InstanceID> delete vlan
<startvlanid> [- <endvlanid>]).
Parameters description:
InstanceID: Instance ID.
startvlanid- endvlanid:VLANlist
Informational
Event description: Spanning Tree MST configuration ID VLAN
mapping table added.
Log Message: Spanning Tree MST configuration ID VLAN
mapping table changed (instance: <InstanceID> add vlan
<startvlanid> [- <endvlanid>]).
Parameters description:
InstanceID: Instance ID.
startvlanid- endvlanid:VLANlist
Informational
CFM
Event description: Cross-connect is detected
Log Message: CFM cross-connect. VLAN:<vlanid>, Local(MD
Level:<mdlevel>, Port <[unitID:]portNum>,
Direction:<mepdirection>) Remote(MEPID:<mepid>,
Critical