EasyManua.ls Logo

D-Link xStack DGS-3620 Series - Page 1360

D-Link xStack DGS-3620 Series
1371 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1355
(1) pimGroupMappingPimMode
(2) pimInvalidJoinPruneAddressType
(3) pimInvalidJoinPruneOrigin
(4) pimInvalidJoinPruneGroup
(5) pimInvalidJoinPruneRp
(6) pimNeighborUpTime
pimRPMappingChage
A pimRPMappingChange notification
signifies a change to the active RP
mapping on this device.
This notification is generated whenever
the counter pimRPMappingChangeCount
is incremented, subject to the rate limit
specified by
pimRPMappingChangeNotificationPeriod.
Binding objects:
(1) pimGroupMappingPimMode
(2) pimGroupMappingPrecedence
1.3.6.1.2.1.157.0.4
pimInterfaceElection
A pimInterfaceElection notification
signifies
that a new DR or DF has been elected on
a network.
This notification is generated whenever
the counter pimInterfaceElectionWinCount
is incremented, subject to the rate limit
specified by
pimInterfaceElectionNotificationPeriod.
Binding objects:
(1) pimInterfaceAddressType
(2) pimInterfaceAddress
1.3.6.1.2.1.157.0.5
LLDP-MED
lldpRemTablesChange
A lldpRemTablesChange notification is
sent when
the value of
lldpStatsRemTableLastChangeTime
changes.
Binding objects:
(1) lldpStatsRemTablesInserts
(2) lldpStatsRemTablesDeletes
(3) lldpStatsRemTablesDrops
(4) lldpStatsRemTablesAgeouts
1.0.8802.1.1.2.0.0.1
lldpXMedTopologyCha
ngeDetected
A notification generated by the local
device sensing
a change in the topology that indicates
that a new
remote
device attached to a local port, or
a remote
device disconnected or moved from one
port to
another.
Binding objects:
(1) lldpRemChassisIdSubtype
(2) lldpRemChassisId
(3) lldpXMedRemDeviceClass
1.0.8808.1.1.2.1.5.4795
.0.1
802.3ah OAM
dot3OamThresholdEvent
This notification is sent when a local or
remote threshold crossing event is
detected.
Binding objects:
(1) dot3OamEventLogTimestamp
(2) dot3OamEventLogOui
(3)dot3OamEventLogType
(4)dot3OamEventLogLocation
(5)dot3OamEventLogWindowHi
(6)dot3OamEventLogWindowLo
(7)dot3OamEventLogThresholdHi
(8)dot3OamEventLogThresholdLo
(9)dot3OamEventLogValue
(10)dot3OamEventLogRunningTotal
(11)dot3OamEventLogEventTotal
1.3.6.1.2.1.158.0.1
dot3OamNonThresholdEvent
This notification is sent when a local or
remote non-threshold crossing event is
detected.
1.3.6.1.2.1.158.0.2

Table of Contents

Related product manuals