D-Link xStack DGS-3620 Series - Page 1361

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1356
Binding objects:
(1) dot3OamEventLogTimestamp
(2) dot3OamEventLogOui
(3) dot3OamEventLogType
(4)dot3OamEventLogLocation
(5)dot3OamEventLogEventTotal
Upload/Download
agentFirmwareUpgrade
This trap is sent when the process of
upgrading the firmware via SNMP has
finished.
Binding objects:
(1) swMultiImageVersion
1.3.6.1.4.1.171.12.1.7.2
.0.7
agentCfgOperCompleteTrap
The trap is sent when the configuration is
completely saved, uploaded or
downloaded
Binding objects:
unitID
agentCfgOperate
agentLoginUserName
1.3.6.1.4.1.171.12.1.7.2
.0.9
Gratuitous ARP
agentGratuitousARPTrap
The trap is sent when IP address
conflicted.
Binding objects:
(1) ipaddr
(2) macaddr
(3) portNumber
(4) agentGratuitousARPInterfaceName
1.3.6.1.4.1.171.12.1.7.2
.0.5
BGP
bgpEstablishedNotification
The BGP established event is generated
when the BGP FSM enters the
ESTABLISHED state.
Binding objects:
(1) bgpPeerRemoteAddr
(2) bgpPeerLastError
(3) bgpPeerState
1.3.6.1.2.1.15.0.1
bgpBackwardTransNotification
The bgpBackwardTransNotification event
is generated when the BGP FSM moves
from a higher numbered state to a lower
numbered state.
Binding objects:
(1) bgpPeerRemoteAddr
(2) bgpPeerLastError
(3) bgpPeerState
1.3.6.1.2.1.15.0.2
Stacking
swUnitInsert
Unit Hot Insert notification.
Binding objects:
(1) swUnitMgmtId.
(2) swUnitMgmtMacAddr.
1.3.6.1.4.1.171.12.11.2.
2.1.0.1
swUnitRemove Unit Hot Remove notification.
Binding objects:
(1) swUnitMgmtId.
(2) swUnitMgmtMacAddr.
1.3.6.1.4.1.171.12.11.2.
2.1.0.2
swUnitFailure
Unit Failure notification.
Binding objects:
(1) swUnitMgmtId.
1.3.6.1.4.1.171.12.11.2.
2.1.0.3
swUnitTPChange
The stacking topology change notification.
Binding objects:
(1) swStackTopologyType
(2) swUnitMgmtId
(3) swUnitMgmtMacAddr
1.3.6.1.4.1.171.12.11.2.
2.1.0.4
swUnitRoleChange The stacking unit role change notification.
Binding objects:
(1) swStackRoleType
(2) swUnitMgmtId
1.3.6.1.4.1.171.12.11.2.
2.1.0.5
VRRP
vrrpTrapNewMaster
The newMaster trap indicates that the
sending agent has transitioned to 'Master'
state.
Binding objects:
(1) vrrpOperMasterIpAddr
1.3.6.1.2.1.68.0.1
vrrpTrapAuthFailure
A vrrpAuthFailure trap signifies that a
packet has been received from a router
whose authentication key or authentication
1.3.6.1.2.1.68.0.2