D-Link xStack DGS-3620 Series - Page 201

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
196
Example
Show the information of the BGP peer group local1:
DGS-3620-28PC:admin# create bgp neighbor peer_group local1
Command: create bgp neighbor peer_group local1
Success.
DGS-3620-28PC:admin# create bgp neighbor 10.2.2.2 remote_as 10
Command: create bgp neighbor 10.2.2.2 remote_as 10
Success.
DGS-3620-28PC:admin# config bgp peer_group local1 add 10.2.2.2
Command: config bgp peer_group local1 add 10.2.2.2
Success.
DGS-3620-28PC:admin# show bgp peer_group local1
Command: show bgp peer_group local1
BGP Peer Group :local1
-----------------------------------------------------------------------
Description :
Session State : Enabled
Remote AS : 10
Advertisement Interval : 30 seconds
Keepalive Interval : 60 seconds
Holdtime Interval : 180 seconds
AS Origination Interval : 15 seconds
Connect Retry Interval : 120 seconds
EBGP Multihop : 1
Weight : 0
Members : 10.2.2.2
For Address Family IPv4 Unicast
Next Hop Self : Disabled
Route Reflector Client : Disabled
Send Community : None
Remove Private As : Disabled
AllowAS In : Disabled
Soft Reconfiguration Inbound : Disabled
Default Originate : Disabled
Outbound Route Filter (ORF) type (64) Prefix list:
Send Mode : Disabled
Receive Mode : Disabled
Prefix Max Count : 12000
Prefix Warning Threshold : 75
Prefix Warning Only : Disabled
DGS-3620-28PC:admin#