D-Link xStack DGS-3620 Series - Page 212

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
207
12-42 delete bgp community_list
Description
This command is used to delete a BGP community list.
Format
delete bgp community_list [list_name <list_name 16> | all]
Parameters
list_name - Specifies the name of the community list to be deleted.
<list_name 16> - Enter the community list name here. This name can be up to 16 characters
long.
all - Specifies that all the community lists will be used.
Restrictions
Only Administrators, Operators and Power-Users can issue this command. (EI Mode Only
Command)
Example
This example deletes the community list named as list1:
DGS-3620-28PC:admin# delete bgp community_list list_name test1
Command: delete bgp community_list list_name test1
Success.
DGS-3620-28PC:admin#
12-43 show bgp community_list
Description
This command is used to show a BGP community list.
Format
show bgp community_list {<list_name 16>}
Parameters
community_list - Specifies the name of community list to be displayed.
<list_name 16> - (Optional) Enter the community list name here. This name can be up to 16
characters long.
Restrictions
None. (EI Mode Only Command)