xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
26
Restrictions
Only Administrator-level users can issue this command.
Example
To reset all the switch parameters except the IP address:
DGS-3620-28PC:admin# reset
Command: reset
Are you sure you want to proceed with system reset
except Stacking Information, IP address, log, user account and banner?(y/n)
Success.
To reset the system configuration settings:
DGS-3620-28PC:admin# reset config
Command: reset config
Are you sure you want to proceed with system reset except stack
information?(y/n)
Success.
To reset all system parameters, save, and restart the switch:
DGS-3620-28PC:admin# reset system
Command: reset system
Are you sure you want to proceed with system reset?(y/t/n)
y-(reset all include stacking configuration, save, reboot )
t-(reset all exclude stacking configuration, save, reboot)
n-(cancel command)
Loading factory default configuration… Done.
Saving all configuration to NV-RAM… Done.
Please wait, the switch is rebooting…
2-23 login
Description
This command is used to log in to the switch.
Format
login
To Next Page
Loading...
