D-Link xStack DGS-3620 Series - Page 345

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
340
Format
debug bgp show damp {ipv6 unicast}
Parameters
ipv6 unicast – (Optional) Specifies to debug the IPv6 unicast address family.
Restrictions
Only Administrator-level users can issue this command. (EI Mode Only Command)
Example
Configure BGP to show current dampening information:
DGS-3620-28PC:admin# debug bgp show damp
Command: debug bgp show damp
Route Map : NULL
Reach Half Life Time is : 900 seconds
Reuse Value : 750
Suppress Value : 2000
MAX Suppress Time : 3600 seconds
Unreach Half Life Time is : 900 seconds
Reuse Index Size : 1024
Reuse List Size : 256
Reuse Offset : 19
Current dampened routes:
Damp Reuse List Info:
reuse_index index ptr penalty flap start_time t_updated
suppress_time evt
show BGP Damp no reuse list info: 0
index ptr penalty flap start_time t_updated suppress_time evt
BGP Damp Decay List Info:
decay array size is 90.
Index Value
----- -----
1 1
2 0.969663
3 0.940247
4 0.911722
5 0.884064
6 0.857244
7 0.831238
8 0.806021
9 0.781569