D-Link xStack DGS-3620 Series - Page 389

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
384
Example
To configure the state of the DHCP relay agent information Option 82:
DGS-3620-28PC:admin#config dhcp_relay option_82 state enable
Command: config dhcp_relay option_82 state enable
Success.
DGS-3620-28PC:admin#
22-17 enable dhcp_relay
Description
This command is used to enable the DHCP relay function on the switch.
Format
enable dhcp _relay
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable the DHCP relay function:
DGS-3620-28PC:admin#enable dhcp_relay
Command: enable dhcp_relay
Success.
DGS-3620-28PC:admin#
22-18 disable dhcp_relay
Description
This command is used to disable the DHCP relay function on the switch.
Format
disable dhcp _relay
Parameters
None.