D-Link xStack DGS-3620 Series - Page 412

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
407
Parameters
None.
Restrictions
None.
Example
To display the DHCP server status:
DGS-3620-28PC:admin#show dhcp_server
Command: show dhcp_server
DHCP Server Global State: Disabled
Ping Packet Number : 2
Ping Timeout : 100 ms
DGS-3620-28PC:admin#
23-26 clear dhcp conflict_ip
Description
This command is used to clear an entry or all entries from the conflict IP database.
Format
clear dhcp conflict_ip [<ipaddr> | all]
Parameters
<ipaddr> - Enter the IP address to be cleared.
all - Specifies that all IP addresses will be cleared.
Restrictions
None.
Example
To clear an IP address 10.20.3.4 from the conflict database:
DGS-3620-28PC:admin#clear dhcp conflict_ip 10.20.3.4
Command: clear dhcp conflict_ip 10.20.3.4
Success.
DGS-3620-28PC:admin#