EasyManua.ls Logo

D-Link xStack DGS-3620 Series - Page 413

D-Link xStack DGS-3620 Series
1371 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
408
23-27 show dhcp conflict_ip
Description
This command is used to display the IP address that has been identified as being in conflict.
The DHCP server will use ping packet to determine whether an IP address is conflicting with other
hosts before binding this IP. The IP address which has been identified in conflict will be moved to
the conflict IP database. The system will not attempt to bind the IP address in the conflict IP
database unless the user clears it from the conflict IP database.
Format
show dhcp conflict_ip {<ipaddr>}
Parameters
<ipaddr> - (Optional) Specifies the IP address to be displayed.
Restrictions
None.
Example
To display the entries in the DHCP conflict IP database:
DGS-3620-28PC:admin# show dhcp conflict_ip
Command: show dhcp conflict_ip
IP Address Detection Method Detection Time
------------ ---------------- ----------------
Total Entries: 0
DGS-3620-28PC:admin#
23-28 create dhcp option_profile
Description
This command is used to create a DHCP option profile.
Format
create dhcp option_profile <profile_name 12>
Parameters
<profile_name 12> - Enter the DHCP option profile name here. This name can be up to 12
characters long.

Table of Contents

Related product manuals