D-Link xStack DGS-3620 Series - Page 414

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
409
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To create a DHCP option profile:
DGS-3620-28PC:admin#create dhcp option_profile profile1
Command: create dhcp option_profile profile1
Success.
DGS-3620-28PC:admin#
23-29 config dhcp option_profile
Description
This command is used to configure an option to and from a DHCP server option profile.
Format
config dhcp option_profile <profile_name 12> [add option <value 1-254> [string <multiword
255> | hex <string 254>] | delete option <value 1-254>]
Parameters
<profile_name 12> - Enter the DHCP server option profile name here. This name can be up to
12 characters long.
add - Specifies to add an option to the DHCP server option profile.
option - Specifies the option value used.
<value 1-254> - Enter the option value used here. This must be between 1 and 254.
string - Specifies the character string associated with the option.
<multiword 255> - Enter the option association string here. This can be up to 255 characters
long.
hex - Specifies the hexadecimal value of the option string.
<string 254> - Enter the hexadecimal value of the option string here. This can be up to 254
hexadecimal characters long.
delete - Specifies to delete an option from the DHCP server option profile.
option - Specifies the option value used.
<value 1-254> - Enter the option value used here. This must be between 1 and 254.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To add option 69 using HEX format:
DGS-3620-28PC:admin#config dhcp option_profile profile1 add option 69 hex
c0a800fe
Command: config dhcp option_profile profile1 add option 69 hex c0a800fe