D-Link xStack DGS-3620 Series - Page 44

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
39
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the 802.1X PDU forwarding state on ports 1 to 2:
DGS-3620-28PC:admin#config 802.1x fwd_pdu ports 1-2 enable
Command: config 802.1x fwd_pdu ports 1-2 enable
Success.
DGS-3620-28PC:admin#
3-10 config 802.1x fwd_pdu system
Description
This command is used to configure the 802.1X PDU forwarding state.
Format
config 802.1x fwd_pdu system [enable | disable]
Parameters
enable - Enable the 802.1X PDU forwarding state.
disable - Disable the 802.1X PDU forwarding state.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To configure the 802.1X PDU forwarding state:
DGS-3620-28PC:admin#config 802.1x fwd_pdu system enable
Command: config 802.1x fwd_pdu system enable
Success.
DGS-3620-28PC:admin#
3-11 config 802.1x auth_parameter ports
Description
This command is used to configure the parameters that control the operation of the authenticator
associated with a port.