xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
459
Parameters
ipaddress - (Optional) Specifies the IP address and netmask of the destination used.
<network_address> - Enter the IP address and netmask of the destination used here.
If no parameter is specified, the system will display the whole DVMRP routing table.
Restrictions
None. (EI Mode Only Command)
Example
To display DVMRP routing table:
DGS-3620-28PC:admin# show dvmrp routing_table
Command: show dvmrp routing_table
DVMRP Routing Table
Source Address/Netmask Upstream Neighbor Metric Learned Interface Expire
---------------------- ----------------- ------ ------- ---------- ------
10.0.0.0/8 10.90.90.90 2 Local System -
20.0.0.0/16 20.1.1.1 2 Local ip2 -
30.0.0.0/24 30.1.1.1 2 Local ip3 -
Total Entries : 3
To Next Page
Loading...
