D-Link xStack DGS-3620 Series - Page 519

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
514
Command: config filter netbios 1:1-1:10 state enable
Success.
DGS-3620-28PC:admin#
39-4 show filter netbios
Description
This command is used to display the NetBIOS filter state on the switch.
Format
show filter netbios
Parameters
None.
Restrictions
None.
Example
To display the NetBIOS filter state:
DGS-3620-28PC:admin#show filter netbios
Command: show filter netbios
Enabled Ports: 1:1-1:3
DGS-3620-28PC:admin#