D-Link xStack DGS-3620 Series User Manual

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
537
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To delete the IGMP static group, with the multicast IP address 225.0.0.2 on the IP interface
“System”.
DGS-3620-28PC:admin# delete igmp static_group ipif System group 225.0.0.2
Command: delete igmp static_group ipif System group 225.0.0.2
Success.
DGS-3620-28PC:admin#
To delete all IGMP static groups on the IP interface “n2”.
DGS-3620-28PC:admin# delete igmp static_group ipif n2 all
Command: delete igmp static_group ipif n2 all
Success.
DGS-3620-28PC:admin#
43-8 show igmp static_group
Description
This command is used to display IGMP static groups on the Switch.
Format
show igmp static_group {ipif <ipif_name 12>}
Parameters
ipif – (Optional) Specifies the IP interface name used for this configuration.
<ipif_name 12> - Enter the IP interface name used for this configuration here. This name can
be up to 12 characters long.
Restrictions
None.
Example
To display all IGMP static groups on the interface “n20”:

D-Link xStack DGS-3620 Series Specifications

General

Brand	D-Link
Model	xStack DGS-3620 Series
Category	Switch
Language	English