D-Link xStack DGS-3620 Series - Page 553

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
548
Format
config router_ports_forbidden [<vlan_name 32> | vlanid <vlanid_list>] [add | delete]
<portlist>
Parameters
<vlan_name 32> - Enter the name of the VLAN on which the router port resides.
vlanid - Specifies the VLAN ID list.
<vlanid_list> - Enter the VLAN ID list.
add - Specifies to add the router ports.
delete - Specifies to delete the router ports.
<portlist> - Enter a range of ports to be configured.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To set up port range 1 to 7 to be forbidden router ports of the default VLAN:
DGS-3620-28PC:admin#config router_ports_forbidden default add 1-7
Command: config router_ports_forbidden default add 1-7
Success.
DGS-3620-28PC:admin#
45-5 enable igmp_snooping
Description
This command allows you to enable IGMP snooping on the switch.
Format
enable igmp_snooping
Parameters
None.
Restrictions
Only Administrators, Operators and Power-Users can issue this command.
Example
To enable IGMP snooping on the switch:
DGS-3620-28PC:admin#enable igmp_snooping
Command: enable igmp_snooping